《電子技術應用》
您所在的位置:首頁 > 模擬設計 > 解決方案 > MicrochipPIC12LF1840T48A433.92MHz系統參考設計方案

MicrochipPIC12LF1840T48A433.92MHz系統參考設計方案

2011-12-02
作者:Microchip 公司

Microchip 公司的PIC12LF1840T48A是具有超低功耗的(XLP)的集成了小于1GHz 安全系統" mhz="" title="安全系統">安全系統的遙控無鑰匙進入以及家庭和建筑物自動化系統.本文介紹了PIC12LF1840T48A主要特性, 應用框圖以及采用CTRL線和PRESET模式的433.92 MHz發送器參考設計電路圖.

The PIC12LF1840T48A’s combination of features in a single, 14-pin TSSOP package makes it ideal for space-, power- and cost-constrained applications, such as remote keyless entry fobs for automobiles, garage doors and home security systems, as well as a broad range of other home and building automation systems.

In addition to being optimized for secure wireless communication, the PIC12LF1840T48A is designed to maximize battery life via an extremely low operating voltage of 1.8V. Furthermore, the XLP microcontroller has extremely low sleep current consumption, and is efficiently integrated with the transmitter to enable fast wake-up and send functionality that takes full advantage of the MCU’s 8 MIPS operation.

PIC12LF1840T48A主要特性:

High-Performance RISC CPU:

• Only 49 Instructions to Learn:

- All single-cycle instructions except branches

• Operating Speed:

- DC – 32 MHz oscillator/clock input

- DC – 125 ns instruction cycle

• Interrupt Capability with Automatic Context Saving

• 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset

• Direct, Indirect and Relative Addressing modes:

- Two full 16-bit File Select Registers (FSRs)

- FSRs can read program and data memory

Flexible Oscillator Structure:

• Precision 32 MHz Internal Oscillator Block:

- Factory calibrated to ± 1%, typical

- Software selectable frequencies range of 31 kHz to 32 MHz

• 31 kHz Low-Power Internal Oscillator

• Four Crystal modes up to 32 MHz

• Three External Clock modes up to 32 MHz

• 4X Phase Lock Loop (PLL)

• Fail-Safe Clock Monitor:

- Allows for safe shutdown if peripheral clock stops

• Two-Speed Oscillator Start-up

• Reference Clock module:

- Programmable clock output frequency and duty-cycle

Special Microcontroller Features:

• 1.8V-3.6V Operation

• Self-Reprogrammable under Software Control

• Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)

• Programmable Brown-out Reset (BOR)

• Extended Watchdog Timer (WDT)

• In-Circuit Serial Programming™ (ICSP™) via Two Pins

• In-Circuit Debug (ICD) via Two Pins

• Enhanced Low-Voltage Programming (LVP)

• Programmable Code Protection

• Power-Saving Sleep mode

Low-Power Features:

• Standby Current:

- 520 nA

• Operating Current (not transmitting):

- 34.5 μA @ 1 MHz, 1.8V, typical

• Transmitting Current:

- 9mA @ 0 dBm

- 16.5 mA @ 10 dBm

RF Transmitter:

• Fully Integrated Transmitter

• FSK Operation up to 100 kbps

• OOK Operation up to 10 kbps

• Operation in 418, 434 and 868 MHz Bands

- 8 Selectable center frequencies

• +10 dBm or 0 dBm Configurable Output Power

Analog Features:

• Analog-to-Digital Converter (ADC) module:

- 10-bit resolution, 4 channels

- Conversion available during Sleep

• Analog Comparator module:

- One rail-to-rail analog comparator

- Power mode control

- Software controllable hysteresis

• Voltage Reference module:

- Fixed Voltage Reference (FVR) with 1.024V and 2.048V output levels

- 5-bit rail-to-rail resistive DAC with positive and negative reference selection

Peripheral Features:

• 5 I/O Pins and 1 Input Only Pin:

- High current sink/source 25 mA/25 mA

- Programmable weak pull-ups

- Programmable interrupt-on-change pins

• Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler

• Enhanced Timer1:

- 16-bit timer/counter with prescaler

- External Gate Input mode

- Dedicated, low-power 32 kHz oscillator driver

• Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler

• Enhanced CCP (ECCP) module:

- Software selectable time bases

- Auto-shutdown and auto-restart

- PWM steering

• Master Synchronous Serial Port (MSSP) with SPI and I2CTM with:

- 7-bit address masking

- SMBus/PMBusTM compatibility

• Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) module:

- RS-232, RS-485 and LIN compatible

- Auto-Baud Detect

• Capacitive Sensing (CPS) module (mTouchTM):

- 4 input channels

• Data Signal Modulator module:

- Selectable modulator and carrier sources

• SR Latch:

- Multiple Set/Reset input options

- Emulates 555 Timer applications

圖1.PIC12LF1840T48A 方框圖

圖2.PIC12LF1840T48A應用框圖

A reference schematic diagram with an RF filter and matching network is provided. The component values are given for 433.92 MHz. The crystal is a low-cost 26 MHz HC-49.

圖3.采用CTRL線的發送器參考設計電路圖

圖4.采用PRESET模式的發送器參考設計電路圖

詳情請見:
http://ww1.microchip.com/downloads/en/DeviceDoc/41594A.pdf

http://ww1.microchip.com/downloads/en/AppNotes/01393B.pdf



本站內容除特別聲明的原創文章之外,轉載內容只為傳遞更多信息,并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容、版權和其它問題,請及時通過電子郵件或電話通知我們,以便迅速采取適當措施,避免給雙方造成不必要的經濟損失。聯系電話:010-82306118;郵箱:aet@chinaaet.com。
主站蜘蛛池模板: 草草在线免费视频 | 亚洲午夜成激人情在线影院 | 久久夜色视频 | 国产一区二区三区视频 | 久久免费99精品国产自在现线 | 疯狂吮乳小说 | 毛片基地免费视频a | 老扒夜夜春宵粗大好爽aa毛片 | 日本一区二区视频在线观看 | 337p欧洲亚大胆精品 | 一区二区三区在线 | 亚洲人成图片小说网站 | 日韩精品视频免费网址 | 日韩精品网站 | 国产人成免费视频 | 国产综合成人观看在线 | 911国内自产亚洲第一 | 亚洲首页国产精品丝袜 | 小黄鸭视频网站 | 成人黄色激情视频 | 成人在线观看网站 | 国产精品青草久久 | 国产成人刺激视频在线观看 | 欧美在线视频二区 | 成人午夜爽爽爽免费视频 | 在线国产视频观看 | 国产国语高清在线视频二区 | 最好看的中文字幕2019免费 | 国产在线观看一区精品 | 91视频成人 | 久草视频在线资源 | 日本妇人成熟免费观看18 | 最近资源中文字幕4 | 国产高清看片日韩欧美久久 | 西西人体xxxⅹbbbb | avtt亚洲天堂 | 色综合天天干 | 婷婷成人丁香五月综合激情 | 亚洲国产日韩在线人高清 磁力 | 日本午夜在线 | 女性一级全黄生活片在线播放 |