超寬帶微封裝頻率合成器的設計
2021年電子技術應用第12期
王文凱
西南電子技術研究所,四川 成都610036
摘要: 現代電子偵察系統中,尤其是便攜式、單兵等通信偵察系統,在功能技術指標保持不變的前提下,對于整機體積和重量都提出了更高要求,要求內部器件具有更小體積和更輕重量,所以,實現小型化、輕量化的超寬帶頻率源成為實現便攜式偵察設備的重點和關鍵?;趩捂i相環構架,采用新的電路和工藝實現方式,實現了0.2 GHz~20 GHz高性能超寬帶頻率源,為工程應用提供高性能、小型化和輕量化的頻率源。
中圖分類號: TN743
文獻標識碼: A
DOI:10.16157/j.issn.0258-7998.211452
中文引用格式: 王文凱. 超寬帶微封裝頻率合成器的設計[J].電子技術應用,2021,47(12):131-134,140.
英文引用格式: Wang Wenkai. Design of ultrawideband and micropackaging frequency synthesizer[J]. Application of Electronic Technique,2021,47(12):131-134,140.
文獻標識碼: A
DOI:10.16157/j.issn.0258-7998.211452
中文引用格式: 王文凱. 超寬帶微封裝頻率合成器的設計[J].電子技術應用,2021,47(12):131-134,140.
英文引用格式: Wang Wenkai. Design of ultrawideband and micropackaging frequency synthesizer[J]. Application of Electronic Technique,2021,47(12):131-134,140.
Design of ultrawideband and micropackaging frequency synthesizer
Wang Wenkai
Southwest Institute of Electronic Technology,Chengdu 610036,China
Abstract: In the modern electronic reconnaissance system, especially the portable and individual communication reconnaissance system, on the premise of ensuring the function and technical indexes stay the same, the volume and weight of the overall system are put forward higher requirements, the internal devices are required to have smaller volume and lighter weight. Therefore, realizing the miniaturized and lightweight ultra wide band frequency synthesizer has become the key point to realize portable reconnaissance equipment. Based on the single phase-locked loop(PLL) technique, this paper adopts a new circuit and process realization method to get the high performance ultra wide band frequency synthesizer, which provides a high performance, miniaturized and lightweight frequency synthesizer for engineering application.
Key words : ultra wide band;miniaturized;smaller package;lightweight;phase-locked loop frequency synthesizer
0 引言
頻率合成器是超外差體制通信偵察系統中必不可少的重要組成部分,其主要實現以下兩方面功能:一為混頻時提供混頻器所需的寬帶本振信號;另外為在系統測向功能前多通道校準時,利用標校源產生的寬帶標校信號對通道幅度與相位提供校準信號,以實現精準測向[1]。超寬帶、小型化、輕量化頻率合成器在現在通信偵察系統,尤其是便攜式通察系統中必不可少,得到了廣泛應用并對其提出了更高的要求[2-3]。在通常超寬帶頻率合成器設計方案中,通過多次混頻以達到頻率擴展的實現方案得到了廣泛應用,但該方案由于使用混頻器、濾波器和多級本振使功耗增加、體積增大、重量無法降低,不適用于便攜式系統中。故本文提出一種單環模式,通過鎖定高頻寬帶壓控振蕩器后,通過可編程分頻器實現頻率擴展,采用先進的3D微封裝技術,最終實現超寬帶微封小型化頻率合成器的設計[4-5]。
本文詳細內容請下載:http://m.viuna.cn/resource/share/2000003886。
作者信息:
王文凱
(西南電子技術研究所,四川 成都610036)
此內容為AET網站原創,未經授權禁止轉載。